From 0bbad483dbdb2fda0524249599f285ab8dd1e15d Mon Sep 17 00:00:00 2001
From: Frederik Lindenaar <frederik@lindenaar.nl>
Date: Sat, 26 Oct 2019 22:06:07 +0200
Subject: [PATCH] Fixed minor markdown layout issues with Gitlab and closed #4
---
README.md | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/README.md b/README.md
index cd8b76e..c0795b5 100644
--- a/README.md
+++ b/README.md
@@ -51,15 +51,15 @@ The setup of this solution consists of the following steps:
1. Ensure that the Perl modules CGI and Net::DNS are installed.
* on Debian/Ubuntu linux this can be done by:
- ```
+ ~~~
sudo apt-get install libcgi-pm-perl libnet-dns-perl
- ```
+ ~~~
* or directly from CPAN (assuming that is installed):
- ```
+ ~~~
cpan CGI Net::DNS
- ```
+ ~~~
2. Install the file `dyndns.pl` either in your cgi-bin directory or in a
separate folder
@@ -74,21 +74,21 @@ The setup of this solution consists of the following steps:
server's cgi-bin directory) add the following line to your Apache virtual
host configuration (replacing `[INSTALL_DIR]` with the install directory):
- ```
+ ~~~
ScriptAlias /dyndns [INSTALL_DIR]/dyndns.pl
- ```
+ ~~~
in case you have installed the script in a non-standard folder, you will
also need the following to make this work on Apache 2.4 (again replacing
`[INSTALL_DIR]` with the install directory):
- ```
+ ~~~
<Directory [INSTALL_DIR]/>
AllowOverride None
Options +ExecCGI -MultiViews -Indexes
Require all granted
</Directory>
- ```
+ ~~~
reload apache with `/etc/init.d/apache reload` to make the script
available at <http://myserver.mydomain.tld/dyndns>.
@@ -102,7 +102,7 @@ The setup of this solution consists of the following steps:
(e.g. `include "named.dyndns.conf";`). For a basic dynamic DNS setup a
configuration like below is required:
- ```
+ ~~~
// Define the keys for DynDNS
key "dyndns.mydomain.tld" {
algorithm hmac-md5; secret "QdDJC7QVYmsCxgWoSAUmBg==";
@@ -125,7 +125,7 @@ The setup of this solution consists of the following steps:
grant siteuser name site.dyndns.mydomain.tld ANY;
};
};
- ```
+ ~~~
The above defines a domain zone file `dyndns/db.dyndns.mydomain.tld` with
two signer/keys. *siteuser* only can update `site.dyndns.mydomain.tld`
@@ -139,20 +139,20 @@ The setup of this solution consists of the following steps:
* to generate a new key *dyndns.mydomain.tld*:
- ```
+ ~~~
ddns-confgen -a hmac-md5 -k dyndns.mydomain.tld -z dyndns.mydomain.tld
- ```
+ ~~~
* generate the required configuration for *siteuser* (or any new user):
- ```
+ ~~~
ddns-confgen -a hmac-md5 -k siteuser -s site.dyndns.mydomain.tld
- ```
+ ~~~
6. Generate an initial zone file like the one below for the dyndns domain in
the location specified in the config file above.
- ```
+ ~~~
$TTL 3600 ; 1 hour
@ IN SOA auth.dns.mydomain.tld. hostmaster.mydomain.tld. (
2019000001 ; serial
@@ -164,7 +164,7 @@ The setup of this solution consists of the following steps:
TXT "Dynamic DNS zone for mydomain.tld"
site A 1.2.3.4
- ```
+ ~~~
Please note that Bind will rewrite this file and you need to be careful
with it. Entries do not need to exist initially, as long as the signer/key
@@ -507,7 +507,7 @@ DDNS registrations using a custom URL. The Basic format for the registration
URL to register is:
~~~
-https://SERVER/cgi-bin/dyndns/update?host=HOSTNAME&ip=IPADDRESS&secret=KEY`
+https://SERVER/cgi-bin/dyndns/update?host=HOSTNAME&ip=IPADDRESS&secret=KEY
~~~
Check the [list of parameters supported](req_params) for all available options,
@@ -552,13 +552,13 @@ https://SERVER/cgi-bin/dyndns/view?host
-------------------------------------------
For Cisco routers add the following config:
-```
+~~~
ip ddns update method DYNDNS
HTTP
add https://SERVER/cgi-bin/dyndns/update?host=<h>&ip=<a>&secret=SECRET
remove https://SERVER/cgi-bin/dyndns/delete?host=<h>&secret=SECRET
interval maximum 0 1 0 0
-```
+~~~
replacing `SERVER` for the host the script is installed on and `SECRET`
for a DNS key authorized to update the record. The cisco router will replace <a>
@@ -566,11 +566,11 @@ and <h> with the IPv4 address and hostname.
To setup interface `Dialer0` to register as `hostname.dyndns.mydomain.tld` add:
-```
+~~~
interface Dialer0
ip ddns update hostname hostname.dyndns.mydomain.tld
ip ddns update DYNDNS
-```
+~~~
Which instructs to register using the address of Dialer0 as soon as that is up
or changes (this also works for non-dialer devices).
--
libgit2 0.22.2